Oil production based on reserves in place in the Ashtart oilfield required the precise knowledge of the main reservoir parameters including porosity, permeability and irreducible water saturation. The reservoir series is comprised of Nummulitid but heterogeneous limestones of the El Garia Formation, the petrofacies texture, geometry and petrophysical parameters of which were apprehended using seismic profiles; gamma-ray and sonic lateral logs, as well as cores and cuttings taken in drillwells. The evaluation of residual oil saturation, multiphase flow and oil production techniques from the Ashtart reservoir also depend on variations and zoning of the irreducible water saturation. Estimation of the initial water saturation and hence variations in the capillary pressure in the reservoir, required compilations of porosity data measured on cores, supplemented by additional but computed porosities based on acoustic log diagrams. Furthermore, Gamma Ray, Sonic log, and well to well correlations tied to core results and well cuttings, help recognize the layered lithologies within the El Garia flat lying but stratified, Ypresian in origin reservoir rocks. Abundant permeability and porosity values compiled in the light of seismic sequence and Gamma Ray and Sonic log details, were integrated in an empirical approach using the Leverett J function, to model the irreducible water saturation depending on the capillary pressure distribution in the whole reservoir. Variations of this principal hydraulic parameter in a wide range (Swir: 12 to 40%) compared to the preceding lithostratigraphic, petrographical and petrophysical results help recognize four main rock pore types in the commercial Ashtart reservoir. These vary from (1) a zone with a rock pore type showing an irreducible water saturation as low as 12%, and a fairly good reservoir character in the lower third part of the lithologic column which is thought to channelize a multiphase fluid flow in the global oilfield, (2) to those zones built-up of rock pore types with higher initial water saturation amounts which in certain cases tend to indicate zones of degraded reservoir. Our study suggests that diagenesis prevalently controls porosity, due to operative dissolutions of the Nummulitid tests/bioclasts, and cementation; moreover, diagenesis exerts effects on permeability by interconnecting intergranular and intratest pore spaces. In contrast, microfracturing enhances permeability of the reservoir. This is notably the case in the fairly permeable central zone in the Ashtart reservoir with excellent petrophysical parameters, but which were found to degrade gradually towards its peripheries. 相似文献
Reliability analysis has been considered as an important step in any system design process. A reliable electrical power system means a system which has sufficient power to feed the load demand during a certain period or, in other words, has small Loss of Load Probability (LOLP). LOLP is defined as an expected fraction of load not met by its power needs from electrical power system during its lifetime. Photovoltaic (PV)/Wind Energy System (WES) Hybrid Electric Power System (PV/WES HEPS) differs considerably from the Utility Grid (UG) in its performance and operating characteristics. With the interconnection of PV/WES as a HEPS into the UG, the fluctuating nature of the energy produced by these systems has a different effect on the overall system reliability than that of the fluctuating nature of energy produced by UG. Therefore, this paper presents a complete study, from reliability point of view, to determine the impact of interconnecting PV/WES HEPS into UG. Four different configurations of PV/WES/UG have been investigated and a comparative study between these four different configurations has been carried out. The overall system is divided into three subsystems, containing the UG, PV and WES. The generation capacity outage table has been built for each configuration of these subsystems. These capacity outage tables of UG, PV/UG, WES/UG and PV/WES/UG are calculated and updated to incorporate their fluctuating energy production. This paper also presents a fuzzy logic technique to calculate and assess the reliability index for each HEPS configuration under study. 相似文献
Hydrogenated amorphous silicon (a-Si H) films deposited on crystalline silicon substrates using the DC saddle field (DCSF) plasma enhanced chemical vapor deposition (PECVD) system have been investigated. We have determined the complex dielectric function, ε(E) = ε1(E) + iε2(E) for hydrogenated amorphous silicon (a-Si:H) thin films by spectroscopic ellipsometry (SE) in the 1.5-4.5 eV energy range at room temperature. The results indicate that there is a change in the structure of the a-Si:H films as the thickness is increased above 4 nm. This is attributed to either an increase in the bonded hydrogen content and, or a decrease of voids during the growth of a-Si:H films. The film thickness and deposition temperature are two important parameters that lead to both hydrogen content variation and silicon bonding change as well as significant variations in the optical band gap. The influence of substrate temperature during deposition on film and interface properties is also included. 相似文献
Low thermal conductivity of binary fatty acid mixture of palmitic and lauric acids (PA-LA) within the value range of 0.15-0.17 W/(m·K) restricts its wide utilization as thermal energy storage material in the active regime of solar heating applications at low operating temperatures. Nevertheless, this mixture as phase change material (PCM) has a suitable phase-change temperature and heat of 36 ℃ and 176.3 J/g, respectively. Hence, the objective of this study is to formulate a novel form-stable composite PCM with the PA-LA mixture and expanded graphite (EG) as a thermal enhancer. PA-LA eutectic mixture with varied concentrations of EG was prepared and characterized. The thermal conductivity of PA-LA/EG increased gradually with the mass of EG. Optimum thermal properties were observed in PA-LA/(5% EG) composite, where its melting (Tm), freezing temperature (Tf), latent melting heat and thermal conductivity was 35.53 ℃, 34.84 ℃, 174 J/g, and 1.19 W/(m·K), respectively. Also, the composite PCM is characterized by good chemical-thermal stability and thermal reliability for long-term usage. In conclusion, it can be utilized as a prospective form-stable PCM for thermal energy storage in solar heating systems, overheat treatment systems, and other thermal storage applications at low operating temperatures. 相似文献
A survey of current safety practices in the design of residential buildings in Saudi Arabia identified deficiencies in governance and design procedures. A systematic safety compliance checklist was developed to address these deficiencies incorporating existing local safety instructions and international safety codes and standards. Checklist use is intended to ensure compliance with minimal safety requirements in the design of residential buildings. 相似文献
The ability of rats to localize sounds in space was determined before and after kainic acid lesions of the superior olivary complex (SOC). Animals were tested with a 45-ms noise burst delivered from loudspeakers on the right or left of midline. Anatomical data showed that the lesions destroyed neurons in SOC while preserving fibers of passage in the trapezoid body and other decussating pathways of the auditory brainstem. Animals with either unilateral or bilateral SOC lesions were impaired in their ability to localize a single noise burst postoperatively. Deficits were also found after unilateral lesions restricted primarily to the lateral superior olive. SOC lesions resulted in an elevation in minimum audible angles for sound localization. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
This paper deals with design and implementation of digital filter processors to be used as down-samplers in wireless transceivers. We consider a homodyne direct conversion and propose an improved method to specify each stage of the cascade structure. The proposed scheme results in a globally compact implementation. The method is detailed for DECT standard and illustrated by a fixed point FPGA based implementation. 相似文献
This work presents a software for analysis and synthesis of four types of planar lines used on the millimeter wave band: Suspended Microstrip Line, Inverted Microstrip Line, Suspended Stripline and Broadside Coupled Stripline. Conceived for IBM/PG or compatible microcomputers, the program, (MMWL), can study each configuration at a time or all of them at once, and it does not matter if it is synthesis or analysis for each line at the same time. The results are presented in Tables shown in the same screen. The program also provides curves of characteristic impedances against conducting strip width for each one of studied structures. Therefore, it allows choosing the best combination for circuit realization, becoming a helpful tool for projects and with acceptable results.